Tilton 7.25 Inch 3 Plate Metallic Clutch Disc Pack – 1 Inch X 24 Spline – Stacked Hub

Worn discs mean slip, lost drive and heat you can't afford. The Tilton 7.25 Inch 3 Plate Metallic Clutch Disc Pack – 1 Inch x 24 Spline – Stacked Hub restores your Tilton 7.25 in (184 mm) 3-plate metallic racing clutch with fresh sintered metallic discs renowned for their durability, torque capacity and heat capacity.

FRESH FRICTION, FULL HOLDING POWER

The disc pack is the consumable heart of a race clutch. As the friction material wears, clamp load falls away and the clutch begins to slip under load. Fitting a new pack brings the clutch back to full torque capacity, with the quick, positive engagement that makes Tilton metallic discs a staple in road racing, circle track, endurance and off-road competition.

Full-circle sintered metallic discs put more friction surface to work, which means a lower wear rate and higher heat capacity, session after session.

MATCH THE HUB AND SPLINE TO YOUR BUILD

Multi-plate disc packs vary with input shaft size and length, so the hub layout matters. This pack uses a stacked hub configuration – A outer hub (6-rivet, 0.375 in / 9.5 mm) with two C inner hubs (6-rivet, 0.250 in / 6.4 mm) – with a 1 in (25.4 mm) x 24-tooth, 30° (late Nissan) spline. Match the hub configuration and spline to your existing clutch and gearbox input shaft before ordering.

KEY BENEFITS

Restored torque capacity, fast and positive race engagement, high heat capacity and a low wear rate – the simplest way to keep your Tilton 7.25 in (184 mm) 3-plate clutch performing at its best.

Key Features:

  • 7.25 in (184 mm) Sintered Metallic Discs – Renowned durability, torque capacity and heat capacity
  • 3-Plate Pack – Replacement discs for Tilton OT-Series 7.25 in (184 mm) 3-plate metallic racing clutches
  • Full-Circle 6-Rivet Discs – Greater surface area for a lower wear rate and higher heat capacity
  • Quick Engagement – Positive, race-focused bite for fast launches and shifts
  • 1 Inch x 24 Spline – 1 in (25.4 mm) x 24-tooth, 30° (late Nissan) input shaft fitment
  • Stacked Hub Configuration – Built to suit your input shaft length and clutch stack

Specifications:

Feature Details
Brand Tilton Engineering
Part Number 64185-2-ACC-57
Disc Diameter 7.25 in (184 mm)
Number of Discs 3
Friction Material Sintered metallic
Disc Type Full circle, 6-rivet hub
New Disc Thickness 0.104 in (2.64 mm)
Hub Configuration Stacked – A outer hub (6-rivet, 0.375 in / 9.5 mm) with two C inner hubs (6-rivet, 0.250 in / 6.4 mm)
Spline 1 in (25.4 mm) x 24-tooth, 30° (late Nissan)
Suits Tilton OT-Series 7.25 in (184 mm) 3-plate metallic racing clutches
Use Motorsport only – not recommended for street use

Rebuild with genuine Tilton – add to cart now.

Related products