SPARCO DRS ALLOY WHEEL

The Sparco DRS is available in 17–18" sizes across 2 finishes. Select your size, offset, PCD and finish above to find the exact fitment for your build.

COMPETITIVE SPIRIT FOR COMPACT SPORTS CARS

The Sparco DRS brings competitive spirit to compact sports cars with a sleek design where no detail is left to chance. Its name honours the racing success of Sparco and OZ: like the Drag Reduction System in Formula 1, it's built to give you that extra edge. Sparco Wheels was born in 2009 from a collaboration between Sparco and OZ Racing, combining the image, values and Racing DNA of two of motorsport's most respected names. Every Sparco wheel is developed and designed by OZ and quality-controlled by OZ.

OPEN SPOKES, RACING MOOD

A grooved 10-spoke design emphasises the aerodynamic look, while the open layout shows off your brakes for a proper racing mood. DRS is a heat-treated monoblock in 7.5x17" and 8x18", TPMS compatible, run-flat ready and winter proof, and a strong match for the Volkswagen Golf, Audi A3 and BMW 2 Series Coupe. Finishes are Rally Bronze and Gloss Black.

Key Features:

• Grooved 10-Spoke Design – Emphasises the aerodynamic look and shows off the brakes
• Motorsport-Inspired Name – Inspired by Formula 1's Drag Reduction System
• Compact Sports Car Fitments – Golf, A3, 2 Series Coupe and more
• Two Finishes – Rally Bronze or Gloss Black
• TPMS Compatible – Works with standard tyre pressure monitoring sensors
• Run Flat & Winter Proof – Supports run-flat tyre setups and is rated for year-round use
• Engineered by OZ – Developed, designed and quality-controlled by OZ

Product Details:

Fitment check: confirm your vehicle's PCD, offset, centre bore and brake clearance before ordering. Not sure? Contact the Racer Industries team and we'll help you find the right fitment.

Disclaimer:

*Wheels sold by Racer Industries are designed for offroad/motorsport use, however they may be used on a road car in Australia, provided the vehicle owner has checked that they meet the rules and regulations in their particular state/territory. It is recommended that the National Code of Practice for Light Vehicle Construction and Modification (VSB14) and local transport authority guidelines are considered. A brief summary of VSB14 is below –

• The track width cannot increase by more than 25mm for passenger cars.
• Wheel width must not exceed original manufacturer specifications by more than 30% for passenger cars.
• Wheels and tyres must fit completely inside the bodywork or mudguards/flares when pointed straight ahead, without rubbing against the suspension, brakes or chassis at any steering angle.
• Using wheel spacers or adapters between the wheel hub and rim is illegal unless fitted directly by the original manufacturer. Wheels must have the identical stud/bolt pattern, and be located by the same diameter centre spigot, using suitable adaptor rings where necessary.
• The wheel nuts or bolts must have a thread engagement length that is at least equal to the thread diameter.
• Steering or suspension stops must not be modified to create wheel clearance.
• Wheels must comply with Australian Design Rule standards for road use and not feature a full circumferential weld other than one that attaches the wheel centre to the rim itself.
• The wheels will be deemed illegal without a separate engineering certificate if the brake calipers, hubs, suspension and steering components need to be modified in any way.

If the wheel upgrade exceeds these standard thresholds, you will need an assessment by an authorised automotive engineer to obtain an engineering certificate. Further to the above, it’s recommended you check the below documents for your particular state/territory –

• South Australia – SA Vehicle standards and modification requirements, plus VSB 14 where applicable.
• Queensland – Queensland Transport and Main Roads light vehicle modification rules and certification codes.
• New South Wales – Transport for NSW vehicle standards and VSCCS certification pathway.
• Victoria – VicRoads vehicle standards information and VASS approval pathway.
• Western Australia – Department of Transport WA minor, simple and complex light vehicle modification categories.
• Tasmania – Transport Tasmania vehicle modification approval process.
• Northern Territory – NT vehicle modification and inspection requirements.
• Australian Capital Territory – Access Canberra modified vehicle requirements.