SPARCO COMPETITION H-2 PD 6 POINT HARNESS - FIA 8853-2016

A harness that's difficult to adjust under pressure isn't just inconvenient — it's a liability. The Sparco Competition H-2 PD 6 Point Harness is engineered to eliminate that problem. FIA 8853-2016 certified for use with an FHR/HANS device, it combines 2" FHR-specific webbing, an ultralight high load buckle and re-profiled pull-down adjusters into a system that's fast to set up, precise to fit and built to hold under the loads competition driving puts through your restraint system.

BUILT FOR THE DEMANDS OF MULTI-DRIVER COMPETITION

In endurance racing and multi-driver formats, driver change time matters. The H-2 PD is specifically designed around that reality. The re-profiled lightweight pull-down adjusters allow fast, repeatable belt tension adjustments without the fumbling that costs you time in the pit lane. Snap hook fixings on all belts mean each attachment point is positive, secure and quick to connect or release — no threading, no guesswork, no delay.

Lightweight steel adjusters across the system give you precise fit control without adding unnecessary mass, keeping the hardware lean and the function reliable. The roll bar loop attachment option adds setup flexibility for cars where traditional mounting points aren't available, letting the harness wrap safely around the roll bar without compromise.

RESTRAINT YOU CAN TRUST AT COMPETITION LOADS

The 2" FHR-specific webbing is designed to work in conjunction with a Frontal Head Restraint system — maintaining correct geometry, distributing load evenly and providing the stability that HANS-compatible setups demand. The ultralight high load buckle delivers the clamping strength required at competition level while remaining fast to operate with gloved hands, in the car, under pressure.

FIA 8853-2016 approval confirms the H-2 PD meets current homologation requirements for 6-point harness systems, with this approval batch valid through to 31 December 2030. This harness must be used with an FHR/HANS device — not optional, not advisory.

KEY BENEFITS

Fast driver changes through re-profiled pull-down adjusters. Secure, consistent attachment via snap hook fixings on all belts. Lightweight hardware that doesn't sacrifice durability or load capacity. FHR-specific webbing geometry that works with your HANS device, not against it. Roll bar loop mounting flexibility for varied car configurations. FIA 8853-2016 certified for competition use through to 2030.

Key Features:

• FIA 8853-2016 Approved — Current homologation, valid to 31 Dec 2030. For use with FHR/HANS device only.
• 2" FHR Specific Webbing — Designed to work with Frontal Head Restraint systems, maintaining correct geometry and load distribution under competition conditions.
• Ultralight High Load Buckle — Fast to operate with gloved hands. Provides the clamping strength required at competition level without unnecessary bulk.
• Re-profiled Lightweight Pull-Down Adjusters — Purpose-built for multi-driver use. Faster, more repeatable belt tension adjustments during pit stops and driver changes.
• Lightweight Steel Adjusters — Precise fit control without added weight. Durable construction built for repeated use across a competition season.
• Snap Hook Fixings (All Belts) — Positive, secure attachment across every belt. Quick to connect and release without compromising reliability.
• Roll Bar Loop Attachment — Mounting flexibility for cars where conventional fixing points aren't available.
• 6-Point Configuration — Full restraint across shoulders, sub, and crotch straps for competition-grade retention.

Specifications: